PS2000 Multi – Purpose Spray Unit
PS2000 in action
PS2000 Multi – Purpose Spray Unit
The PS2000 is a versatile spray unit, capable of pumping and spraying a variety of cement-based materials, as well as water proofers, protective coatings and textured paints. It can also be used for grouting and void filling.
It is easily maneuverable and has a low-level material hopper for ease of loading. The twin section electric/pneumatic control panel is positioned at a convenient height to access the controls and all the important components are protected within this waterproof cabinet. The progressive cavity rotor/stator pump is driven by a 0.75kW electric drive with a variable speed control system.
Download Specs
You can download this tech sheet, simply by clicking the button to the right.
Technical Data
Features
| Model | PS200 Multi – Purpose Spray Unit |
|---|---|
| Weight | 125kg |
| Dimensions | 49cm wide x 140cm deep x 87cm high |
| Pump Speed | 0-145RPM |
| Typical Output | Approx. 10kg/min for a typical cement-based mortar |
| Max output (water) | 15L/min at zero back pressure |
| Drive | Via variable speed hydraulic gearbox |
| Electric Motor | 0.75kW, IP55 rated (hose proof |
| Electrical Supply | 240V and 110V Single Phase 50Hz/60Hz standard |
| Air Consumption | 430L/min (15CFM) at min pressure of 7Bar (100psi |
| Air Inlet | Ø 3/4” (19mm) hose tail (airline not included) |
| Slurry Hose | 7.5m (24ft) of Ø 25mm (1”) hose |
| Hopper Capacity | 50L (approx. 100kg of slurry) |
| Hopper Loading Height | 87cm |
- 0.75 kW motor with variable speed gearbox
- Progressive cavity rotor/stator pump for consistent output
- Pump speed 0–145 RPM; typical output ~10 kg/min (cement-based mortar)
- Max water output 15 L/min at zero back pressure
- 50 L low-level hopper (~100 kg slurry), 87 cm loading height
- Handwheel for quick stator removal during maintenance
- Hopper vibrator to keep material flowing
- IP66-rated twin-section electric/pneumatic control panel in waterproof cabinet
- Manual and remote spray/pump modes
